Allround Textile Sealant

Premium Water-Based Protection for Indoor & Outdoor Textiles

Allround Textile Sealant provides long-lasting protection for a wide range of textiles without altering their appearance or feel. This advanced, water-based formula contains no solvents or fluorocarbon resins, making it suitable for use both indoors and outdoors. It leaves behind a pleasant, fresh fragrance and delivers outstanding resistance to water, dirt and stains.

The sealing components create an easy-to-clean effect, allowing treated textiles to stay cleaner for longer. Depending on the textile type, application purpose, level of wear and cleaning routines, the protection can last up to 24 months—comparable to approximately 50 gentle wash cycles at 30°C.

Areas of Use

Suitable for nearly all textile surfaces used indoors and outdoors, such as:

• Convertible roofs

• Fabric seat covers

• Textile upholstery

• Outdoor fabrics and covers

Not suitable for:

• Carpets

• Rugs

Recommendations for Use

1. Clean the textile thoroughly using a suitable cleaner and allow it to dry completely. The surface must be dry, clean and free from residues before sealing.

2. Mask off surrounding areas that should not be treated.

3. Apply the Textile Sealant evenly using a microfiber sponge to create a thin, uniform wet film.

4. Work the product deeply into the fibers in a crosswise motion, then allow the textile to dry fully.

5. Apply in suitable conditions: recommended temperature range is 10°C to 40°C.

6. Allow up to 24 hours for full drying and complete development of the protective effect (time varies with textile type and temperature).

7. Clean gently after sealing. The sealed surface should be maintained using mild cleaning methods.

Tip:

If the protective effect diminishes over time, it can be restored by reapplying the sealant—as long as the textile is clean and not heavily soiled.